Body Hardware

Per page:  
Display:  

SKU: P85361
Front Bumper and Fender Apron U-Nuts - M4.8 Screw Size; 2mm Maximum Panel Range; 10mm Center of Hole to Edge; Black Plastic
pack

SKU: P85363
Fender and Headliner Retainer - Fits 7mm Hole; 25.4mm Head Diameter; 26mm Stem Length; 29mm Overall Length; 1.0mm - 13.0mm Panel Range; Black Textured Plastic
pack

SKU: P85365
Bumper and Engine Under Cover Drive-Type Rivet - Plastic Black Body/Gray Pin; Fits 9mm Hole; 22mm Flange Diameter; 4.3mm - 6.4mm Panel Range; 15mm Stem Length
pack

SKU: P85371
Marker and Tail Lamp, Bumper Grommet - Black Plastic; Fits Hole Size 7.7mm; 12mm Flange; 19mm Overall Length; 0.8mm Panel Range; M4.2 Screw Size
pack

SKU: P85373
Bumper Push-Type Retainer - Fits 8mm Hole; 18mm Head Diameter; 12mm Stem Length; Gray Nylon
pack

SKU: P85382
Cowl and Bumper Push-Type Retainer - Fits 7mm Hole; 15mm Head Diameter; 10mm Stem Length; Black Nylon
pack

SKU: P85384
Body Side Moulding Clip - 18mm x 25mm Head Size; 29mm Overall Length; White Nylon
pack

SKU: P85396
Trim Panel Grommet with Sealer - White Nylon; Fits Hole Size 7mm; 12mm x 14.5mm Head Size; 15mm Stem Length
pack

SKU: P85402
Moulding Clip - 9mm Stem Length; 8mm x 15mm Top Head Size; 15mm Bottom Head Diameter; White Nylon
pack

SKU: P85426
Door and Garnish Moulding Clip - 12.4mm Overall Height; White Nylon
pack

SKU: P85431
Door Moulding Clip - Fits 9mm Hole; 24mm Stem Length; 12mm x 20mm Bottom Head Size; 12mm x 16mm Top Head Size; Yellow Nylon
pack

SKU: P85435
Trim Panel Retainer - 11/16" Head Diameter; 5/16" Stem Diameter; 13/16" Stem Length; Gray Nylon
pack

SKU: P85439
Hood Insulation Retainer - Fits 7mm Hole; 30mm Head Diameter; 13mm Stem Length; 3.0mm - 11.0mm Panel Range; Black Textured Plastic
pack

SKU: P85440
Cowl Grille Retainer with Sealer - 19.5mm Top Head Diameter; 19.5mm Middle Head Diameter; 18.5mm Bottom Head Diameter; 11mm Stem Diameter; 16mm Stem Length; Black Nylon
pack

SKU: P85451
Bumper, Exterior Trim, Fender and Quarter Panel Push-Type Retainer - Fits 8mm Hole; 12mm Head Diameter; 11mm Stem Length; Dark Gray Nylon
pack

SKU: P85465
Fender Liner Blind Rivet - 6.3mm - 6.8mm Hole Diameter; 4.0mm - 6.0mm Grip Range; 26.5mm Flange Diameter; Black Plastic;
pack

SKU: P86096
Trim Panel Retainer - 13mm Top Head Diameter; 16mm Middle Head Diameter; 18mm Bottom Head Diameter; 10mm Stem Diameter; 14mm Stem Length; White Nylon
pack

SKU: P86105
Mud Flap Retainer - 11/16" Head Diameter; 5/16" Stem Diameter; 1-3/4" Stem Length; Black Nylon
pack

SKU: P86109
Fuel Tank Mounting, Exterior Trim and Rear Door Specialty Rivet - 1/4" Diameter; 3/16" - 17/64" Grip Range; 1/2" Flange Diameter; Steel/Steel
pack

SKU: P86119
Trim Panel Retainer - 20mm Top Head Diameter; 19mm Middle Head Diameter; 19mm Bottom Head Diameter; 11mm Stem Diameter; 16mm Stem Length; Black Nylon
pack

SKU: P86123
Door Lock Rod Clip - 3/16" Rod Size; White Nylon; Used on Right-Hand Side
pack

SKU: P86131
Fender Moulding Clip - 6mm Stem Length; 10mm x 19mm Bottom Head Size; 7mm x 7mm Top Head Size; White Nylon
pack

SKU: P86137
Front Bumper Moulding Clip - 15mm Stem Length; 25mm x 74mm Head Size; 17mm Overall Height; Black Nylon
pack

SKU: P91111
Rear Bumper Grommet with Sealer - Black Nylon; 21mm Head Diameter; 27mm Stem Length
pack

SKU: P91127
Roof Rail Moulding Retainer - Fits 7mm Hole; Plastic with Seal
pack